Front Elements
Keys
|
16× software-assignable lever keys with rotary encoder and push buttons |
Rotaries
|
2× rotary encoders |
Displays
|
2× high-resolution, bright color, sunlight readable TFT displays with multi-touch control (capacitive) |
Mic
|
1× threaded 6.3 mm jack for microphone |
|
1× internal panel microphone |
|
Speaker
|
Full-range 2.1 system (left, right, subwoofer), DSP-controlled |
NFC
|
Technology RFID, Frequency 13.56 MHz (future use) |
Bluetooth
|
Frequency DTS Band 2400 ... 2483.5 MHz (future use) |
Lightsensor
|
Adaptation of the display brightness to the environment |
XLR-3@
|
2× Analog Microphone inputs on Commentary Headset Adapter
|
Rear Elements
IEC
|
Power Input |
RJ45
|
2× Ethernet ETH 1 / ETH 2 (EtherCON, 1000BASE-T Ethernet, AES67) |
|
1× Artist Matrix connector (AES3) |
|
|
1× Management port for panel configuration |
|
MicroSD-card
|
1× MicroSD / MicroSDHC card up to 32 GB (for service purpose only) |
BNC
|
1× Artist Matrix connector (AES3) |
SFP
|
2× Ethernet ETH 3 / ETH 4 (1000BASE-X, Ethernet, AES67) |
USB
|
1× USB 2.0 (standard Type-C, max. 500 mA) |
|
2× USB 2.0 Headset A/B (standard Type-C, max. 500 mA) |
|
DisplayPort
|
1× DisplayPort connector (future use) |
D-Sub-9
|
3× GPI input (Uin = +5 V ... +48 V, female) |
|
3× GPI output (Umax 48 V / 300 mA, protected by self-healing fuse, male) |
|
XLR-3
|
2× Analog audio 4-wire inputs (A/B, female) |
|
2× Analog audio 4-wire outputs (A/B, male) |
|
XLR-4
|
2× Headset (A/B, user-exchangeable headset connector with preinstalled 4-pin male XLR connector, 7-pin male optionally) |
Audio
Equivalent Input Noise
|
Microphone
|
-127 dBu(A) |
20 Hz ... 20 kHz |
Microphone Power
|
Electret Mic
|
+5 VDC (T-Power) |
|
|
Condenser Mic
|
+48 VDC (Phantom-Power) |
||
Maximum
|
Audio A/B
|
+24 dBu |
≙ 0 dBFS, 150 Ω source |
|
Audio A/B
|
+24 dBu |
@ 0 dBFS, 2 kΩ load |
|
|
+23 dBu |
@ 0 dBFS, 600 Ω load |
||
|
Headset A/B
|
+16 dBu (balanced) |
≙ 0 dBFS, -8 dB gain |
|
|
+10 dBu (unbalanced) |
≙ 0 dBFS, -2 dB gain |
||
|
Ext. Microphone
|
+16 dBu (balanced) |
-8 dB gain |
|
|
Headset A/B
|
+19 dBu |
@ 0 dBFS, 600 Ω load |
|
|
+18 dBu |
@ 0 dBFS, 150 Ω load |
||
|
Panel
|
1 mA RMS |
≙ 0 dBFS, 2 kΩ source |
|
|
Internal Speakers |
max. 88 dB SPL |
@ 1 m (left/right) |
|
|
max. 93 dB SPL |
@ 1 m (stereo) |
||
Frequency
|
Audio A/B
|
20 Hz ... 20 kHz,
|
@ -20 dBFS, 150 Ω source |
|
Audio A/B
|
20 Hz ... 20 kHz,
|
@ -20 dBFS, 600 Ω load |
|
|
Headset A/B
|
20 Hz ... 20 kHz,
|
@ -20 dBFS, 150 Ω source |
|
|
Headset A/B
|
20 Hz ... 20 kHz,
|
@ -20 dBFS, 600 Ω load |
|
|
Panel
|
20 Hz ... 20 kHz,
|
@ -20 dBFS, 2 kΩ source |
|
|
Internal Speakers |
90 Hz ... 23 kHz, -10 dB |
||
Distortion
|
Audio A/B
|
<0.001 % ≙ -100 dB,
|
@ -1 dBFS, 150 Ω source |
|
Audio A/B
|
<0.001 % ≙ -100 dB,
|
@ -1 dBFS, 600 Ω load |
|
|
Headset A/B
|
<0.001 % ≙ -100 dB,
|
@ -1 dBFS, +20 dB gain,
|
|
|
Headset A/B
|
<0.001 % ≙ -100 dB,
|
@ -1 dBFS, 600 Ω load |
|
|
<0.001 % ≙ -100 dB,
|
@ -8 dBFS, 150 Ω load |
||
|
Panel
|
<0.001 % ≙ -100 dB,
|
@ -1 dBFS, 2 kΩ source |
|
CMRR
|
Ext. Microphone
|
>100 dB |
@ 1 kHz, +34 dB gain, 40 Ω source |
Gain Range
|
Ext. Microphone
|
-24 ... +72 dB |
|
Sample Rate / Resolution
|
48 kHz / 24 Bit |
||
General
Power
|
Supply voltage |
100 – 240 VAC, 50 – 60 Hz |
|
|
Power consumption |
≤15 W, ≤50 BTU/hr |
||
Dimensions
|
Form factor |
Desktop |
|
|
Width |
282 mm / 11.1" |
outer dimensions
|
|
|
Height |
115 mm / 4.5" |
||
|
Depth |
174 mm / 6.8" |
||
|
VESA mount |
75 × 75 mm |
||
Weight
|
2.525 g / 5.57 lbs |
including two preinstalled
|
|
Cooling
|
Fan Noise (temperature controlled fan) |
<23 dB(A) idle, 26 dB(A) max. fan speed |
@ 0.7m (noise emission meets GK10 / DIN 15996) |
Environment
|
Operating Temperature |
0 ... +40 °C |
|
|
Storage Temperature |
-30 ... +80 °C |
||
|
Humidity |
20 ... 90 % relative (non-condensing) |
||
|
Max. Altitude |
3000 m AMSL |
||