Service
-
All service has to be undertaken only by qualified Riedel service personnel.
-
Do not plug in, turn on or attempt to operate an obviously damaged device.
-
Never attempt to modify the equipment components for any reason.
All adjustments have been done at the factory before the shipment of the devices.
No maintenance is required and no user serviceable parts are inside the module.
Environment
-
Never place the devices in areas of high dust particles or humidity.
-
Be aware of the operating temperature of the systems (0°C – +50°C).
-
Never place containers with any liquids on top of the devices.
-
If the equipment has been exposed to a cold environment and transferred to a warm environment, condensation may form inside the housing. Wait at least 6 hours before applying any power to the equipment.
Ventilation
-
Do not place the devices next to a heat source, e.g. a radiator.
-
The ventilation openings of the devices must never be blocked.
Voltage
-
The power cable should only be connected to a correctly grounded source.
-
Do not use any adapters.
-
Never bypass a ground contact.
-
The mains plugs is used as a disconnect device. It is imperative that access to the mains plugs and the associated mains socket/outlet is never obstructed.
To reduce the risk of electric shock do not remove cover or expose the products to rain or moisture.
-
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
-
Apparatet må tilkoples jordet stikkontakt.
-
Apparaten skall anslutas till jordat uttag.
-
Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord.
Laser Safety
The NSA-008A can be equipped with optical fiber modules (FOM) for the data transmission over a fiber.
Observe the following guidelines and warnings:
-
Because invisible radiation might be emitted from the aperture of SFPs when no fiber cable is connected, avoid exposure to radiation and do not stare into open apertures.
-
Do not look at fibers that connect to unknown sources.
-
Do not examine unterminated optical ports with optical instruments.
-
Avoid direct exposure to the beam.
|
The laser transceivers are considered as a class 1 laser product per EN 60825-1, FDA 21 CFR1040.10 and 1040.11 requirements. |
The accessible laser radiation is harmless under reasonably foreseeable conditions. Note: The reasonably foreseeable conditions are met during normal operation.
The limit value of the accessible radiation of DIN EN 60825-1:2001-11 in the wavelength range from 400 nm to 1,400 nm for the classification of a laser is the same between 100 s and 30,000 s. Therefore, nuisances cannot be ruled out in the case of long-term effects.
Disposal
Disposal of old Electrical & Electric Equipment (Applicable throughout the European Union and other European countries with separate collection programs).
|
This symbol, found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve natural resources. For more detailed information about the recycling of this product please contact your local city office. |