SimplyLive
2.2 2.1 2.0
2.2 2.1 2.0 English

Audio Presets and Audio Monitoring in Live Module

In the Live module of SimplyLive Production Suite Flex, audio control is designed to be fast, reliable, and safe during live operation.


You work with Audio Presets for instant switching and Audio Monitoring to always stay in control of what is going on air.

Audio Presets

Audio Presets allow you to instantly recall predefined audio configurations.

These presets are located in the centre control panel and can include:

  • Different audio source routings

  • Specific channel combinations

  • Predefined mix configurations for Program and Preview

This means you do not need to manually adjust audio each time.
Instead, you simply select the correct preset depending on the situation.

How to Use

  • Press the desired Audio Preset button

  • The system will immediately apply the selected configuration

For example, you can:

  • swap tracks 3-4 to 1-2

  • swap tracks 1-2 to 3-4

  • route audio from one camera to another

  • apply one audio setup to multiple cameras

If required:

  • Use Apply Now! (More Presets) to confirm or access additional presets

This allows very fast reaction during live production without risk of manual mistakes.

adio pres.png

Pre-Selecting Audio Presets

You are able to pre-select the audio preset that you are wanting to go to, before you make the transition.

Simply press the audio preset that you want to transition to and it will start to flash, meaning this audio preset will be enabled on the next transition to PGM.

You have to option to enable this feature in “Setup > Pref > Role/UI > Enable pre-selected audio preset” - and choose between if you want to transition on every transition to PGM or only when transitioning from PRV to PGM or never (disable the action).

image-20260929-113205.png

You also have the option to choose the behaviour of the audio preset after a transition.

If “Audio Preset follows video” this means the audio preset that it swapped with will stay pre-selected, ready for you to transition back to that preset.

If you want to always manually choose what is pre-selected before a transition, you can selected “Apply Audio Preset to PGM and PRV” and this will remove the pre-selected audio preset after a transition.

Audio Monitoring

Audio Monitoring ensures that you always know what is happening with your audio signals.

You can monitor:

  • PGM (Program) → what is currently on air

  • PRV (Preview) → what is prepared before going on air

Info

You can monitor audio on PGM, PRV, and Replay outputs.

Audio meters are available directly in the interface, allowing you to:

  • Check audio levels in real time

  • Verify signal presence

  • Avoid clipping or missing audio

Pro Tip

Audio Presets are about speed and consistency
Audio Monitoring is about safety and verification

You always combine both.

Pro Tip

Never rely only on presets.

Even if everything is predefined, always check your audio meters before taking something to Program.
This is especially important when switching between:

  • Cameras with different audio

  • Replay content

  • External sources

A quick check prevents silent or distorted output on air.