In the Transport menu, you can select whether the SmartPanel should connect to an Artist-32/64/128 or Artist-1024.
Changing the intercom mode will cause the SmartPanel to restart.
Intercom Mode
|
Selection of the Artist matrix type to which the SmartPanel should connect. This setting is also available in the Web Interface on the Device Settings tab. (Artist-32/64/128, Artist-1024) Changing the Intercom Mode requires a restart of the device, which must be confirmed first. |
Transport Mode *1
|
Selection of the protocol to be used for connection to the Artist matrix. (AES67, AES3 Cat, AES3 Coax) |
TCP Port
|
Selection of the TCP port to be used for connection to the Artist matrix. (Artist-32/64/128: 5060, Artist-1024: 6060) |
*1 only available in Intercom Mode Artist-32/64/128