This chapter describes the installation of SAME.
Requirements before Installation
-
The SAME Engine is installed on a separate Debian 12 server.
-
BIOS must be set to allow OS to control power management and performance settings:
-
CPU Power Management: OS DBPM
-
Memory Frequency: Maximum Performance
-
Energy Efficiency Policy: Performance
-
-
A user (e.g., “engine") must be enabled and added to the sudo group on the server. This requires a reboot to take effekt.
Installation Package
The engine server Debian 12 package is available from Riedel Customer Service.
Installation
The installation of SAME 1.0 requires a special procedure without using the Riedel Software Manager.
Example
sudo dpkg -i ./same-engine-server-1.0.0-debian12-amd64-intel-Linux.deb
The package will also install all required dependencies. This requires access to the Debian package manager repositories (either via Internet access or a mirror on the local network).
System Configuration
-
After first installation a reboot is required.
-
After successful installation, the engine host should announce itself over mDNS to the UES.
-
Configuration is done in the STAGE user interface.