SAME uses services that are assigned to use ports for inter-server communication channels at runtime. Once a port has been assigned for use by a service on a server, that port cannot be used by another service when communicating to that server.
The Riedel Software Manager has specific requirements for the ports that must be open during software deployment, installation, and maintenance. See RSM Deployment Ports.
End User Access
Internal Control Network Access
End User Browser <> STAGE Cluster (bi-directional)
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
HTTP |
HTTP |
80 |
TCP |
|
HTTPS |
HTTPS |
443 |
TCP |
System Services
STAGE Cluster <> STAGE Cluster
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
NTP |
NTP |
123 |
UDP |
|
DNS |
DNS |
53 |
TCP and UDP |
|
SSH |
Secured Shell (SSH) |
22 |
TCP |
|
HTTP |
HTTP |
80 |
TCP |
|
HTTPS |
HTTPS |
443 |
TCP |
|
Nomad HTTP API |
Nomad HTTP API - This is used by clients and servers to serve the HTTP API. |
4646 |
TCP |
|
Nomad RPC |
Nomad - Internal RPC communication between client agents and servers, and for inter-server traffic. |
4647 |
TCP |
|
Nomad Serf WAN |
Nomad - Used by servers to gossip both over the LAN and WAN to other servers. |
4648 |
TCP and UDP |
|
Consul API |
Consul API |
8500 |
TCP |
|
Riedel Software Manager |
Riedel Software Manager API |
9900-
|
TCP and UDP |
|
Consul DNS |
Inter-Node Consul DNS |
8600 |
TCP and UDP |
|
Consul HTTP |
Inter-Node Consul HTTP |
8500 |
TCP |
|
Consul HTTP(S) |
Inter-Node Consul HTTP(S) |
8501 |
TCP |
|
Consul gRPC |
Inter-Node Consul gRPC |
8502 |
TCP |
|
Consul gRPC TLS |
Inter-Node Consul gRPC with TLS |
8503 |
TCP |
|
Consul Server RPC |
Inter-Node Consul internal communication with servers |
8300 |
TCP |
|
Consul LAN Serf |
The Serf local area network port |
8301 |
TCP and UDP |
|
Consul WAN Serf |
The Serf wide area network port |
8302 |
TCP and UDP |
|
Vert.X |
Event Bus |
20000-
|
TCP |
|
Hazelcast |
Cluster Management |
20000-
|
TCP |
STAGE Cluster <> Active Directory
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
Active Directory |
User Data Sync |
389 / 636 (default LDAP / LDAPS port, configurable) |
TCP |
STAGE Cluster <> NMOS Registry
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
NMOS |
IS-04 NMOS Discovery and Registration IS-05 NMOS Device Connection Management |
443 / 80 |
TCP / UDP |
STAGE Cluster <> SAME DSP Engine
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
Control Port |
Control Port |
Default: 4000 (Configurable)
|
TCP |
|
Host Engine Control Port |
Host Engine Control Port |
Default: 4001 (Configurable)
|
TCP |
|
Host Media Control Port |
Host Media Control Port |
Default: 4002 (Configurable)
|
TCP |
|
Host Metrics Listen Port |
Host Metrics Listen Port |
Default: 9273 (Configurable) |
TCP |
3rd party Client <> STAGE Cluster
When a SAME DSP Engine instance is set to Direct Control Mode, a Northbound API using REST & gRPD becomes available for use by a Broadcast Control System (BCS). It is also possible for this SAME DSP Engine instance to become an AMWA NMOS Node.
See SAME_ Putting a SAME DSP Engine Under Northbound Control .
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
REST gRPD |
The STAGE Northbound API enables remote control of Applications hosted by a STAGE system. |
Default: 8444 (Configurable at installation time in RSM) |
TCP / UDP |
|
NMOS |
IS-04 NMOS Discovery and Registration IS-05 NMOS Device Connection Management |
Configurable. See SAME_ Putting a SAME DSP Engine Under Northbound Control. |
TCP / UDP |
SAME DSP Engine <> Metrics
|
NAME |
PURPOSE |
PORT/s |
TCP or UDP |
|
LGraphina |
Host Metrics port. |
Default: 8089 (Configurable; see SAME_ SAME DSP Engine Configuration ) |
TCP / UDP |