-
Open the Secondary Functions Drawer of a conference key.
-
Select the
The Edit Conference function is not a key command, but must be activated in the Director for the corresponding conference in the key properties.
-
Right-click on the respective conference key: Properties > Conference tab
-
Enable checkbox:
The Info Display shows all Conference members and DYNACONF members (if a Call to Port is configured on this panel).
-
Navigate to the desired conference member:
-
RSP-1232HL
-
Vertical swipe
or -
Turn the lower rotary knob
-
-
RSP-1216HL
-
Vertical swipe
or -
Turn the gray rotary knob
-
-
The Talk and Listen permissions of the individual members are indicated by corresponding symbols on their left and right side.
-
Tap an icon to change the permission.
Enabled permissions are green 
disabled permissions are gray 
-
Tap the center of a member to activate or deactivate it.
Enabled members are bright, deactivated members are grayed out.
Unselected members and all DYNACONF members will remain in the list (if a Call to Port is configured on this panel).
-
Confirm the entry:
-
RSP-1232HL
-
Tap the green
or -
Press the lower rotary knob
-
-
RSP-1216HL
-
Swipe from right to left to show the menu and tap the green
or -
Press the gray rotary knob
-
-
or
-
Cancel the operation:
-
RSP-1232HL
-
Tap the red
-
-
RSP-1216HL
-
Swipe from right to left to show the menu and tap the red
-
-
