1200-SmartPanels
1200-SmartPanels
Breadcrumbs

Signalization(AMA)

The Audio Monitoring app shows the following signalizations in the display and/or in the LED ring.


General Signalization

att_0_for_1940848757.png


Top

Mono sum icon / level meter / mute icon

Center

Title

Bottom

Subtitle
att_1_for_1940848757.png


Level meter: Stereo audio source

The default setting (top = left / bottom = right audio channel) can be changed in the AMA configuration.

(->Main Menu | NMOS IS 08 Channel Order )
(->NMOS IS-08 Channel Order)
att_2_for_1940848757.png


Level meter: Mono audio source
att_3_for_1940848757.png


Level meter: Stereo audio source

(right audio channel isolated)
att_4_for_1940848757.png


Level meter: Stereo audio source

(right audio source offline)
att_5_for_1940848757.png


Level meter: Audio source offline


The level meter has the following threshold values (dBFS):

AMA_LevelMeter_2.png

Soloing an Audio Source

If an audio source is switched solo (pressing and holding the lever down), this is indicated by a yellow signalization depending on the configured group color.

(->Main Menu | Group Color Display Location)

without Group Color

att_7_for_1940848757.png

  • The display shows a yellow border.

  • The title and subtitle are yellow.

  • The LED ring is yellow.

Group Color via LED ring

att_8_for_1940848757.png

  • The display shows a yellow border.

  • The title and subtitle are yellow.

  • The LED ring shows the group color (e.g. light blue).

Group Color via Display

att_9_for_1940848757.png

  • The group color (e.g. light blue) is shown as a border around the display.

  • The title and subtitle are yellow.

  • The LED ring is yellow.

Clipping of an Audio Source

If an audio source is clipping (level above 0 dBFS), this is indicated by a red blinking signalization depending on the configured group color.
(->Main Menu | Group Color Display Location )

If you are in intercom mode or on another key bank, this is signaled by a red flashing border around the 'Monitoring' key bank in the info display.

The standard signaling display duration of 3 seconds can be set between 1 and 10 seconds in the AMA configuration.
(->Main Menu | Clip Indication Timeout in ms )

Without Group Color

att_10_for_1940848757.png

  • The display shows a red border.

  • The LED ring flashes red.

Group Color via LED ring

att_11_for_1940848757.png

  • The display shows a red border.

  • The LED ring alternately shows red and the group color (e.g. light blue).


Group Color via Display

att_12_for_1940848757.png

  • The group color (e.g. light blue) is shown as a border around the display.

  • The LED ring flashes red.