The RC-100 connects to ViBox by Ethernet, either:
-
To a network switch
-
Directly into the client or server
-
Via a USB-to-RJ45 adapter
Assign the NIC to the RCU range
Set the NIC the RC-100 is plugged into to a static IP in the same range as the panel.
To change the panel’s IP, see SL_ Changing RC-100 IP Address.
Link in ViBox UI
1. ViBox UI > Setup > Prefs
2. Select RCU 1 (or RCU 2 for a second panel)
3. Set the remote to RC-100 and enter its IP address
The RC-100 goes live once the ViBox UI is open and the IP is set.