The RC-100 needs to be connected to the same network as the NUC in order to connect.
You can either plug this directly into the NUC or into the network switch.
To update the RC-100’s IP Address, Subnet Mask and Gateway IP, you can only do this via the RC-100 directly
Change network via RC-100 keys
|
Key Combinations |
Action |
Default values |
|
Reset the network to default values |
IP: 192.168.1.200 Subnet: 255.255.255.0 GW: 192.168.1.1 |
|
Press and hold for 3s: “LIVE” + “PLAY” + “PRV CTL” + “PGM1” + “PGM2” + “PGM1+2” |
Enter IP Address mode All lights flash, then the combo keys stay lit |
|
|
Press and hold for 3s: “LIVE” + “PLAY” + “PRV CTL” + “PGM1” + “PGM2” + “PGM1+2” + “REPLAY” |
Set Subnet Mask |
|
|
Press and hold for 3s: “LIVE” + “PLAY” + “PRV CTL” + “PGM1” + “REPLAY” |
Set Gateway |
|
IP Address mode
|
Key Combinations |
Action |
|
ENT (straight away) |
Display the current IP Address |
|
1 - 0, then ENT |
Set a new IP Address |
Modify values
|
Key Combinations |
Action |
|
1 - 0 |
Encode corresponding number |
|
SFT |
Encode dot |
|
ENT |
Validate action |
Example: set the IP Address to 192.168.0.201
Hold LIVE + PLAY + PRV CTL + PGM1 + PGM2 + PGM1+2 for 3s > 1 9 2 <SFT> 1 6 8 <SFT> 0 <10> <SFT> 2 0 1 <ENT>