Function / Shortcut
The top row gives you up to 17 assignable shortcuts, including macros.
-
F1–F7 – Shortcut keys you can program for one-press access to common functions or macros in Prefs > RCU 1 or 2.
-
SHIFT > F1–F10 – More shortcut keys you can program.
-
-
GOTO – Jumps to a timecode, to a clip’s IN or OUT point, or to Live, keeping your IN and OUT points set.
-
SHIFT > GOTO (F8) – Shortcut key you can program.
-
-
LAST CUE – Recalls the last cue on the output you’re controlling. If you’re controlling REPLAYS, it recalls to the output you controlled before changing control.
-
SHIFT > LAST CUE (F9) – Shortcut key you can program.
-
-
MARK – Adds a cue on the output you’re controlling. If you’re controlling REPLAYS, it uses the output you controlled before changing control.
-
SHIFT > MARK (F10) – Shortcut key you can program.
-
Clip Bank
-
ESC – Cancels the current action or closes the active menu.
-
SHIFT – Press to use the secondary (top-label) function of any key, or the SHIFT shortcuts assigned to the top row.
-
1–10 – Stores and recalls clips. A lit LED shows the slot holds a clip.
-
SHIFT > 1–10 – Jumps to that bank number on the current page.
-
-
CLEAR – Clears the selected clip or IN and OUT parametres.
-
ENTER – Confirms the current action or entry.
Load Camera Angles to PGM / PRV
Load to PGM 1 (Upper Row)
-
A–F – Loads the input assigned in the Slomo layout to PGM 1. When a clip is loaded, the key switches to that camera angle if that angle was clipped.
-
SHIFT > A–F – Loads the next six assigned inputs, giving up to 12 inputs on PGM 1.
-
Load to PRV / PGM 2 (Lower Row)
-
A–F – Loads the input assigned in the Slomo layout to PRV / PGM 2. When a clip is loaded, the key switches to that camera angle if that angle was clipped.
-
SHIFT > A–F – Loads the next six assigned inputs, giving up to 12 inputs on PRV / PGM 2.
-
Playout & Control
-
PGM 1 – Gives control to the PGM 1 channel.
-
SHIFT > SPEED – Changes the speed of the selected playlist element.
-
-
PGM 2 – Gives control to the PGM 2 channel.
-
SHIFT > FX – Changes the transition effect at the end of the selected playlist element.
-
-
PGM 1+2 – Links PGM 1 and PGM 2 so they jog and play together.
-
SHIFT > CH ANGLE – Changes the camera angle of the selected playlist element.
-
-
REPLAYS – Controls all camera angles at once for multi-cam replays.
-
SHIFT > AUX CLIP – Assigns a clip as the audio track for the active playlist.
-
-
LIVE – Returns the controlled channel to live.
-
SHIFT > ALL LIVE – Returns all channels to live.
-
-
PLAY – Plays at the current speed.
-
SHIFT > FAST JOG – Enables the jog wheel to move faster through long recordings.
-
-
PRV CTL – Gives you control of Preview for jogging and loading clips. The T-Bar stays with PGM 1.
-
SHIFT > PAGE – Changes the clip page (00–99).
-
T-Bar
-
T-Bar – Controls the playback speed from 0% (Bottom position) to 100% (Top position).
-
Secondary mode – Speed can be set within the range of -300% to 300%. Switch modes with an assigned shortcut.
-
Operational
-
PLIST – Loads the last selected playlist to Preview. If loading to PGM 1 is enabled in Pref > Playlist, it loads to PGM 1 when controlled by the RC-200.
-
SHIFT > LOOP – Loops the loaded clip or playlist.
-
-
BROWSE – Browses through the elements of the playlist.
-
SHIFT > CUT – Splits the selected playlist element into two elements.
-
-
IN – Marks the IN point.
-
SHIFT > INSERT – Inserts a clip into the playlist before the selected element.
-
-
OUT – Marks the OUT point.
-
SHIFT > INSERT AFTER – Inserts a clip into the playlist after the selected element.
-
-
TAKE – Takes PRV to PGM.
-
SHIFT > EXTEND – Extends the selected playlist element.
-
Jog Wheel
-
Jog Wheel – Moves through recorded video frame by frame. Use it to find your IN point, then release the replay with the T-Bar.
Talk Button
-
TALK – Opens talkback while the button is held. Requires a GPI connection.