SimplyLive
2.2 2.1 2.0
2.2 2.1 2.0 English

PiP Tool Inputs

PiP Tool - Sources.png

You can use any video input assigned to the server, plus some of the internal PGM channels recorded within SimplyLive.

Inputs 1–16

All incoming video signals to the server.

An input with no signal will display black on output.


Internal Channels

PGM Pri (Primary PGM for the user)

Shows whatever input, clip or playlist is on the users PGM.

The PiP is a graphic overlay on top of the output. So if you put a PiP containing PGM Pri on the PGM, the PGM Pri window shows what was on the users PGM before the PiP was enabled.

PGM Sec (Secondary PGM for the user)

Shows whatever input, clip or playlist is on the users PRV.

Add PGM Sec to a PiP to switch sources inside the PiP on the users PGM Pri. Whatever you cut to PRV appears in that window.

If you put a PiP containing PGM Sec on PRV, the PGM Sec window shows what was on the PRV before the PiP was enabled. This is the same overlay behaviour as PGM Pri.

rPGM 1 and 2 (Replay PGMs, assigned in WebConfig)

Brings the replay operators’ PGMs into the PiP. This is useful for analysis or split-screen playback of any clips, playlists or replay inputs sent to PGM 3, 4, 5 or 6.

Aux 1 and 2

You can use the AUX channels as sources in the PiP layer. With an AUX channel you can:

  • Use it as a switchable input, switching in the UI or with keyboard shortcuts

  • Load clips and playlists directly to it

  • Use Mix and RTD transitions (PGM 2 / PRV must be free to transition from)

  • Create an audio preset to use its audio on PGM 1