SimplyLive
2.2 2.1 2.0
2.2 2.1 2.0 English

RC-10 Buttons

Clip Bank

  • ESC – Cancels the current action or closes the active menu.

  • SHIFT – Press to use the secondary (top-label) function of any key, or the SHIFT shortcuts assigned to the top row.

  • 1–10 – Stores and recalls clips. A lit LED shows the slot holds a clip.

    • SHIFT > 1–10 – Jumps to that bank number on the current page.

  • CLEAR – Clears the selected clip or IN and OUT parametres.

  • ENTER – Confirms the current action or entry.


Load Camera Angles to PGM / PRV

  • A–F – Loads the input assigned in the Slomo layout to PGM 1. When a clip is loaded, the key switches to that camera angle if that angle was clipped.

    • SHIFT > A–F (F1-6) – Loads the next six assigned inputs, giving up to 12 inputs on PGM 1.


Function / Shortcut

The camera angles row gives you up to 6 assignable shortcuts via the shift function.

  • SHIFT > A-F (F1-6) – Shortcut keys you can program for one-press access to common functions or macros in Prefs > RCU 1 or 2.


Playout & Control

  • PGM 1 – Gives control to the PGM 1 channel.

    • SHIFT > SPEED – Changes the speed of the selected playlist element.

  • PGM 2 – Gives control to the PGM 2 channel.

    • SHIFT > FX – Changes the transition effect at the end of the selected playlist element.

  • PGM 1+2 – Links PGM 1 and PGM 2 so they jog and play together.

    • SHIFT > GOTO – Jumps to a timecode, to a clip’s IN or OUT point, or to Live, keeping your IN and OUT points set.

  • MARK – Adds a cue on the output you’re controlling. If you’re controlling REPLAYS, it uses the output you controlled before changing control.

    • SHIFT > LAST CUE – Recalls the last cue on the output you’re controlling. If you’re controlling REPLAYS, it recalls to the output you controlled before changing control.

  • LIVE – Returns the controlled channel to live.

    • SHIFT > AUX CLIP – Assigns a clip as the audio track for the active playlist.

  • PLAY – Plays at the current speed.

    • SHIFT > FAST JOG – Enables the jog wheel to move faster through long recordings.

  • PRV CTL – Gives you control of Preview for jogging and loading clips. The T-Bar stays with PGM 1.

    • SHIFT > PAGE – Changes the clip page (00–99).


T-Bar

  • T-Bar – Controls the playback speed from 0% (Bottom position) to 100% (Top position).

    • Secondary mode – Speed can be set within the range of -300% to 300%. Switch modes with an assigned shortcut.


Operational

  • PLIST – Loads the last selected playlist to Preview. If loading to PGM 1 is enabled in Pref > Playlist, it loads to PGM 1 when controlled by the RC-200.

    • SHIFT > LOOP – Loops the loaded clip or playlist.

  • BROWSE – Browses through the elements of the playlist.

    • SHIFT > CUT – Splits the selected playlist element into two elements.

  • IN – Marks the IN point.

    • SHIFT > INSERT – Inserts a clip into the playlist before the selected element.

  • OUT – Marks the OUT point.

    • SHIFT > INSERT AFTER – Inserts a clip into the playlist after the selected element.

  • TAKE – Takes PRV to PGM.

    • SHIFT > EXTEND – Extends the selected playlist element.


Jog Wheel

  • Jog Wheel – Moves through recorded video frame by frame. Use it to find your IN point, then release the replay with the T-Bar.