hi human interface®
English

NDI Mappable Node

NDI Mappable Node

Driver Maturity

Production

Recommended for normal production use.

Caution

Compatibility Note: This information is a general guide and may be incomplete, may not match a specific project implementation, and is subject to change as supported products and versions evolve. Confirm the exact implementation and requirements for each project with Riedel and the relevant equipment vendor, then validate the required functions end to end in the target environment before deployment.

Minimum hi Version: v2.7.3

Overview

An NDI® Mappable Node creates operator-defined NDI receiver endpoints in hi. Operators select how many receiver Ports to create and then route discovered NDI Sources to those Ports.

Network Requirements

  • Connection Model: This configuration-only integration creates receiver Ports in hi and does not open an independent network connection.

  • Multicast / Unicast: Not applicable to the template itself.

  • VLAN / IGMP: Follow the NDI Core Integration requirements.

  • Bandwidth: The template adds no network traffic. Routed NDI Sources retain their normal media bandwidth.

  • IP Version: Not applicable to the template itself.

  • Firewall: The template needs no separate rule. Follow the NDI Core Integration and receiver requirements.

Standards Conformance

Standard

Conformance

Notes

NDI

Implemented through the NDI SDK

Vendor-defined protocol

Operator Workflow

  • UI Surface in hi: Inventory > Nodes, Routing Matrix, and the Mappable Node's add-Port controls

  • Resources Controlled: Operator-created NDI receiver Ports

  • Routing Semantics: Each receiver Port appears on the network as an NDI Source named <Node name> (<Port name>). Set the NDI receiver product to that Source. Routing in hi changes the NDI Source that this named Source forwards.

  • Discovery Behavior: The Mappable Node does not discover receivers.

Connection Details

Property

Value

Protocol

NDI

Transport

None
no independent network connection is opened

Default Port

Not applicable

Authentication

Not applicable

Encryption in Transit

Not applicable

Connection Model

Operator-created receiver endpoints configured in the hi system

Required License

hiNDI

Traffic Flow

Routing control from hi
media flows between NDI endpoints

Required Configuration

Parameter

Description

Default

Amount of mappable receivers

Number of NDI receiver Ports created with the Node, in the Configuration group; set when the Node is created. Each receiver Port is visible on the network as an NDI Source.

16

Device-Side Setup

Follow NDI Mappable Node Integration Configuration for the device-side and hi-side configuration steps.

Supported Features

Feature

Access

Exposed Operation and Scope

Mappable Receiver Creation and Port Management

hi-side configuration

Create a configurable receiver Node and add its NDI input Ports in hi.

Source Assignment

Read/write

Assign a discovered NDI Source to a receiver Port.

Device Coverage

Tested With identifies devices that have been tested with hi. Potentially Compatible (Not Yet Verified) identifies devices that use the same protocol or connection method but have not been tested with hi. Device-specific configuration, firmware, and feature support can affect results.

Tested With

  • Kiloview Multiview Player

  • NDI Tools

  • OBS Studio

Potentially Compatible (Not Yet Verified)

  • Other NDI senders and receivers, including software applications, that can send to or receive from the Sources this integration publishes.

Known Limitations

  • Receiver Ports are configured in hi; they are not discovered as receiver devices.

  • Validate the Port count and receiver mapping against the target NDI products before production use.

  • hi does not create the routed Source of a Port when another NDI Source with the same name already exists on the network. hi marks the Port and its Node as conflicting. Use a unique Node or Port name.

What's Not Supported

  • Automatic discovery of receiver products by the Mappable Node Template.

  • Firmware updates or receiver-device administration.

Trademarks

Note

NDI is a registered trademark of Vizrt NDI AB.

All product names, logos, and brands are property of their respective owners. Copyright in third-party software and materials remains with the respective owners. Use of these names does not imply endorsement.

RIEDEL Communications is not affiliated with, endorsed by, or officially partnered with Vizrt NDI AB unless explicitly stated.