The Audio Monitoring app (AMA) enables intercom and IP-based audio monitoring via the internal speaker or via a connected stereo headset in high audio quality. AMA allows direct connection to any SMPTE 2110-30 (AES67) stream available on the network - either dynamically managed via NMOS or in a static IP/SDP-based configuration that mixes the audio directly in the SmartPanel. The app can be configured via a dedicated configuration tool or a broadcast controller via the built-in API. The selection and management of monitored audio sources is as simple as it is flexible. Users can monitor up to 16 stereo/mono SMPTE 2110-30 (AES67) streams in parallel, while a total of 256 audio sources can be pre-configured and managed directly via the SmartPanels' high-resolution touch displays and intuitive interfaces.
To be able to use the Audio Monitoring app, the SmartPanel requires a licensed intercom app and must be connected to an Artist-1024.
AMA will not run if the SmartPanel is connected to an Artist-32/64/128.
High Level System Overview
|
Maximum number of audio sources (joined simultaneously, assigned on keys) |
16 |
|
Maximum number of possible Audio Monitoring Sources (AMS) |
256 |
|
One dedicated Key Bank |
|
|
Works standalone |
|
|
Use AMA and Intercom app simultaneously (on the same hardware) |
|
|
AMA along with other apps (Control & Intercom) on the same key bank |
|
|
Changing the key assignment of the audio sources on the SmartPanel |
|
|
Support for Secondary Functions Drawer (source list, normalize, isolate, mono sum) |
|
|
Level display for each channel |
|
|
Live View & Remote Control |
|
|
Synton & Synchron mode (PTP synchronized) |
|
Supported Audio Standards / Formats
|
SMPTE 2110-30 (AES67) |
|
|
SMPTE 2022-7 (Redundancy) |
|
|
Mono |
|
|
Stereo |
|
|
NMOS IS-04, IS-05, IS-08 |
|
|
Multi-channel (e.g. 5.1 surround) |
|
|
Dolby support |
|