Access to a Scroll-List must be enabled in the Director software. A SmartPanel can only be assigned one Scroll-List if it is connected to an Artist-32/64/128.
-
Right-click on the respective SmartPanel:
Properties > General tab > Scroll-List slot 1...5
On each key of this SmartPanel, the use of this assigned Scroll-List can then be activated.
-
Right-click on the respective key:
Properties > General tab > Use scroll list
-
To call up the Scroll-List configured in the Director on a 1200' SmartPanel, the respective configured rotary knob must be pushed twice.
Search appears in the corresponding display.
-
Turn the rotary knob to select whether the stored functions are to be selected via the alphanumeric name search (Search) or the function type (Call2 Port/Listen2 Port, ...).
-
Confirm the selected search method by pushing the rotary knob.
Alphanumeric Name Search
The first digit of the name flashes.
-
Turn the rotary knob to select the first character.
-
Then confirm by pushing the rotary knob.
-
The second digit can now be selected by turning.
-
Push the rotary knob again to confirm.
Continue until all digits have been entered.
Selection via Function Type
-
Select an available function from the previously selected function group by turning the rotary knob.
