Internal Switcher
Production
Recommended for normal production use.
Caution
Compatibility Note: This information is a general guide and may be incomplete, may not match a specific project implementation, and is subject to change as supported products and versions evolve. Confirm the exact implementation and requirements for each project with Riedel and the relevant equipment vendor, then validate the required functions end to end in the target environment before deployment.
Minimum hi Version: v1.2.1
Overview
The Internal Switcher provides local Crosspoint and Tally state for exercising switching and Tally workflows inside the hi system. Operators can change selections and observe their effect on the hi control state without connecting an external production switcher.
Information
This integration maintains control state. It does not process video or audio media, and a displayed selection does not confirm a change on a physical switcher.
Supported Features
|
Feature |
Access |
Exposed Operation and Scope |
|---|---|---|
|
Crosspoint Selection |
Read/write |
Change and read the local switcher Crosspoint state. |
|
Tally Updates |
Read-only updates |
Observe Tally states produced by the local switching workflow. |
|
Automatic Tally Sequences |
hi-side configuration |
Use the available local macros to generate timed Tally changes. |
Known Limitations
-
The switcher state exists within hi and does not synchronize with an external video switcher.
What's Not Supported
-
Controlling external production switchers or processing media signals.