StageLink™

General Ports

Universal Input port

The universal Input of the NSA-004A, NSA-006A and NSA-007A combines an analog and a digital input. In auto mode it recognizes whether a digital or an analog signal is connected and switches the configuration accordingly.


XLR_3pol_female2.svg
Universal Input (XLR3 female)

Pin

Signal

1

GND

2

Hot (+)

3

Cold (-)


  • The analog pre-amp with high dynamic range can handle low sensitivity dynamic microphones as well as high line levels.

  • In Auto mode, phantom power (48 VDC, 10 mA) is automatically activated when a condenser microphone is detected.

  • The analog input for line level works with an input level of max. +24 dBu.

  • The user can select between various common reference levels.

  • A limiter protects the input once the input voltage reaches a level of 2.7 Vpp.

  • In digital mode a Sample Rate Converter is integrated for AES3 Signals.

Univeral Output port

The universal output of the NSA-005A, NSA-006A and NSA-007A combines an analog and a digital output which is user selectable. The operating mode must be set via the Audio I/O web interface.


XLR_3pol_male2.svg
Universal Output port (XLR3 male)


Pin

Signal

balanced

unbalanced

1

GND

GND / Cold (-)

2

Hot (+)

Hot (+)

3

Cold (-)

GND / Cold (-)


  • The analog output is trafo-symmetrical and supports balanced and unbalanced connections.

  • The output is short circuit protected.

  • User can select between various common reference levels that changes output analog gain for the best possible signal to noise ratio at all settings.

  • The analog output has an output level of max. +24.1 dBu.

  • For the trafo-isolated AES3 output the sample rate corresponds to the system clock.

  • For unbalanced connections, either the + or the - can be connected to GND.

GPI port

The GPI port of the NSA-003A, NSA-006A and NSA-007A provides 3 individual isolated general purpose inputs and a current limited auxiliary output voltage on a robust D-Sub connector.


subD9-female.svg
GPI connector (D-Sub-9 female)


Pin

Signal

Pin

Signal

1

GP-IN1-P

6

GP-IN1-N

2

GP-IN2-P

7

GP-IN2-N

3

GP-IN3-P

8

GP-IN3-N

4

GPIO +5V

9

GND

5

not connected

Chassis

Chassis


GPI-IN_Schematic.svg
GPI connector schematic


  • The input voltage range of the GPI inputs is +5 to +48 VDC (~5 mA constant current limit).

  • The input voltage must not exceed 51 VDC.

  • The polarity of the inputs is important. The higher potential must be connected to “P”.

  • The inputs are galvanically isolated.

  • The switching thresholds are 2.5 VDC max. for the OFF state and 3.5 VDC min. for the ON state.

  • The maximum current of the two "GPIO +5V" auxiliary output voltages (GPI and GPO port) together is 50 mA (protected by self-resetting fuse).

GPO port

The GPO port of the NSA-003A, NSA-006A and NSA-007A provides 3 individual isolated multi-purpose outputs and a current limited auxiliary output voltage on a robust D-Sub connector.


subD9-male.svg
GPO connector (D-Sub-9 male)

Pin

Signal

Pin

Signal

1

GP-OUT1-P

6

GP-OUT1-N

2

GP-OUT2-P

7

GP-OUT2-N

3

GP-OUT3-P

8

GP-OUT3-N

4

GPIO +5V

9

GND

5

not connected

Chassis

Chassis


GPI-OUT_Schematic.svg
GPO connector schematic


The maximum GPO output contact rating is 300 mA, 48 VDC (protected by self-resetting fuse).

  • The polarity of the output has no preference.

  • The outputs are galvanically isolated.

  • The maximum current of the two "GPIO +5V" auxiliary output voltages (GPI and GPO port) together is 50 mA (protected by self-resetting fuse).

USB Type-C port

The USB-C port (USB 2.0) of the NSA-003A, NSA-004A, NSA-005A, NSA-006A and NSA-007A functions as device mode (future option: host mode). The device is compatible with the USB audio specification with two input and two output channels.


USB-Typ-C_Buchse.svg
USB Type-C

The USB 2.0 port can supply connected devices with a limited current of max. 500 mA.

Ethernet Management port

All NSA types allow the user to set up out-of-band control via the 10/100/1000Base-T management port (MGNT), e.g. if a separate network is required for control.


RJ45.svg
Ethernet management (MGNT) RJ-45


Pin

Signal

Standard color

1

TxRx A +

orange/white

2

TxRx A -

orange

3

TxRx B +

green/white

4

TxRx C +

blue

5

TxRx C -

blue/white

6

TxRx B -

green

7

TxRx D +

brown/white

8

TxRx D -

brown

Ethernet Media / PoE ports

All NSA types offer two Gigabit media ports on rugged Neutrik etherCON connections, which are also used to supply the device via PoE+. The media ports can be configured individually or as a daisy chain.


RJ45_2.svg
ETH/PoE (RJ-45 Neutrik etherCON)

Pin

Signal

PoE

Standard color

1

TxRx A +

DC +

orange/white

2

TxRx A -

DC +

orange

3

TxRx B +

DC -

green/white

4

TxRx C +

--

blue

5

TxRx C -

--

blue/white

6

TxRx B -

DC -

green

7

TxRx D +

--

brown/white

8

TxRx D -

--

brown