Front Elements
|
GPI & GPO connectors |
2× Phoenix connector "DMCV 1.5/18-G1F-3.5-LR P20THR" (Connection via the Phoenix plug connector "DFMC 1.5/18-STF-3.5" with screw lock and push-in spring connection for 1.5 mm² cable included in the scope of delivery). |
|
Control Voltage connectors |
2× Phoenix connector "DMCV 1.5/3-G1F-3.5-LR P20THR" (Connection via the Phoenix plug connector "DFMC 1.5/3-STF-3.5" with screw lock and push-in spring connection for 1.5 mm² cable included in the scope of delivery). |
|
Status LEDs & Test buttons |
3× Buttons for navigation and test GPIs und GPOs |
|
Control Voltage IN |
2× Inputs with Aux power (5 VDC, 200 mA) |
|
Control Voltage OUT |
2× Outputs (5 VDC, 10 mA max. load per output) |
|
Status LEDs |
16× GPI, 16× GPO |
Rear Elements
|
Wide Range DC Input |
12 ... 57 VDC, 1.0 A |
|
USB |
USB 2.0 Type-C |
|
Management |
1000 Mbit, IEEE 802.3ab |
|
Primary Ethernet |
1000 Mbit, PoE IEEE 802.3bt |
|
Secondary Ethernet |
1000 Mbit, PoE IEEE 802.3bt |
|
State LEDs |
DC IN (power state),
|
Inputs
GPInput
|
16× galvanically isolated opto-coupler inputs |
|
Isolation Voltage |
100 VDC |
|
Max. Input Voltage |
48 VDC |
|
Input Current |
5 mA (integrated constant current limit) |
|
Switching Threshold |
off: <2.5 VDC, on: >3.5 VDC |
Control Voltage Input
|
5 VDC, 0 ... 100 % |
Outputs
GPOutput
|
16× galvanically isolated solid-state relay output |
|
Isolation Voltage |
100 VDC |
|
Max. Voltage |
48 VDC |
|
Max. Current |
300 mA (self-resetting fuse) |
Control Voltage Output
|
5 VDC, 0 ... 100 %, 10 mA max. load |
GPIO Aux
|
Power Rating |
isolated 5 VDC / 200 mA (overcurrent protection) |
Network
IP Mode
|
Static IP & DHCP |
Connections
|
2× 1G Media (daisy-chain capable) & 1× 1G Control/Management |
NMOS Support
|
IS-04/05/07 |
Overall
Environment
|
Operating Temperature |
0°C ... +50°C, fanless |
|
Storage Temperature |
-25°C ... +80°C |
|
|
Humidity |
20 % ... 90 % rel. hum. (non-condensing) |
|
|
Max. Altitude |
3000 m AMSL |
|
Protection Class
|
IP20 |
|
Power
|
Power Supply |
PoE IEEE 802.3bt, 37 ... 57 VDC,
|
|
Power Source |
PoE+ enabled Switch or Inline Injector,
|
|
|
Power Consumption |
PoE class 3, approx. 8 W / <27.5 BTU/hr |
|
USB 2.0
|
USB-C Connector, DFP, 5 VDC / 500 mA |
|
Dimensions
|
Width |
145 mm (5.7"), chassis |
|
Height |
42 / 47 mm (1.7 / 1.9"), chassis / outer parts |
|
|
Depth |
151 / 152 mm (5.9 / 6.0"), chassis / outer parts |
|
Weight
|
960 g |
|