Scroll-List

Open the Secondary Functions Drawer of a key.
Select the list icon.

Access to a Scroll-List must be enabled in the Director software.
It is possible to assign up to five individual Scroll-Lists to a SmartPanel.

Right-click on the respective SmartPanel:
Properties > General tab > Scroll-List slot 1...5

On each key of this SmartPanel, the use of the assigned Scroll-Lists can then be activated.

Right-click on the respective key:
Properties > General tab > Use scroll list

RSP-1216HL (Scroll-List)

The list selection appears on the info display.

The and icons can be used to switch between the list selection and numerical selection at any time.

Operation of the List Selection

Select a function from the Scroll-List:
- Vertical swipe and tap on an entry
  or
- Turn the gray rotary knob

Confirm the selection:
- Tap the green
  or
- Press the gray rotary knob

or

Cancel the operation:
- Tap the red

Operation of the Numerical Selection

The Info Display shows the prompt:
Use grey encoder to dial.

Enter the first three digits of the desired keypad shortcut one after the other by selecting the corresponding digit (0-9).
- Turn the gray rotary knob to select the digit.
- Press the gray rotary knob to confirm the set digit and move to the next digit.

Unavailable digits are not displayed and skipped.

Tap the icon to delete the last digit entered.

When the last digit is selected, the existing function is shown directly in the display.

Confirm the selection:
- Tap the green
  or
- Press the gray rotary knob

or

Cancel the operation:
- Tap the red

RSP-1232HL (Scroll-List)

The list selection appears on the info display.

The and icons can be used to switch between the list selection and numerical selection at any time.

Operation of the List Selection

Select a function from the Scroll-List:
- Vertical swipe and tap on an entry
  or
- Turn the lower rotary knob

Confirm the selection:
- Tap the green
  or
- Press the lower rotary knob

or

Cancel the operation:
- Tap the red

Operation of the Numerical Selection

The numeric keypad appears on the info display.

Enter the first three digits of the desired keypad shortcut one after the other by tapping the corresponding digit (0-9).

Available digits are displayed brightly, unavailable digits are grayed out.

Tap the icon to delete the last digit entered.

After selecting the second last digit, the available functions are shown directly in the display under the respective digit.

Confirm the selection:
- Tap the green
  or
Cancel the operation:
- Tap the red