This page describes the hiPush18 (Mark 1) Hardware Panel and its specifications.
hiPush18 (Mark 1)
Mark 1
19-inch 1RU Hardware Panel with 18 buttons and two rotary encoders for operation of the hi system. Each button has a 60 x 32 pixel white OLED display with RGB illumination. Each encoder has a separate 64 x 32 pixel OLED display.
Information
Discontinued: This product has been discontinued and is no longer actively maintained or supported. Devices may continue to operate as expected, but future development of this platform is not planned.
Dimensional Views
Front View
hiPush18 Mark 1 Front View.
Rear View
hiPush18 Mark 1 Rear View.
Top View
hiPush18 Mark 1 Top View.
Specifications
|
Regulatory Model |
HI-PNL001 |
|---|---|
|
Number of Switches |
18 |
|
Number of Encoders |
2 |
|
Housing Type |
1 Rack Unit |
|
Front dimensions (W x H) |
482.60 x 44.40 mm |
|
Overall dimensions (W x H x D) |
482.60 x 44.40 x 53.20 mm |
|
Main housing depth |
34.20 mm |
|
Switch Operating Force |
160 ± 40 gf |
|
Switch Travel |
1.25 ± 0.3 mm |
|
Power Connector Type |
WAGO 713 Series 6-pin |
|
Button Display |
60 x 32 pixel white OLED per button |
|
Button Illumination |
RGB LED per button |
|
Encoder Display |
Two 0.49-inch
|
|
Encoder Type |
Incremental
|
|
Encoder Meter Indicator |
None |
|
Lifecycle Status |
Discontinued |
Ordering Information
This model is discontinued and is no longer available for new orders. Use the regulatory model in Specifications to identify installed hardware.
For installation and commissioning instructions, see Hardware Installation and Commissioning. For routine care, see Hardware Cleaning and Maintenance. Review Hardware Network Configuration when connecting a panel to the hi network.
Power Connector Pinout
For pin assignments, see Power Connector Pinout.