This page describes the hiPush54 (Mark 1) Hardware Panel and its specifications.
hiPush54 (Mark 1)
Mark 1
19-inch 2RU Hardware Panel with 54 buttons and two rotary encoders for operation of the hi system. Each button has a 60 x 32 pixel white OLED display with RGB illumination. Each encoder has a separate 64 x 32 pixel OLED display.
Information
Discontinued: This product has been discontinued and is no longer actively maintained or supported. Devices may continue to operate as expected, but future development of this platform is not planned.
Dimensional Views
Front View
hiPush54 Mark 1 Front View.
Rear View
hiPush54 Mark 1 Rear View.
Top View
hiPush54 Mark 1 Top View.
Specifications
|
Regulatory Model |
HI-PNL002 |
|---|---|
|
Number of Switches |
54 |
|
Number of Encoders |
2 |
|
Housing Type |
2 Rack Units |
|
Front dimensions (W x H) |
482.60 x 88.52 mm |
|
Overall dimensions (W x H x D) |
482.60 x 88.52 x 53.20 mm |
|
Main housing depth |
34.20 mm |
|
Lifecycle Status |
Discontinued |
Ordering Information
This model is discontinued and is no longer available for new orders. Use the regulatory model in Specifications to identify installed hardware.
For installation and commissioning instructions, see Hardware Installation and Commissioning. For routine care, see Hardware Cleaning and Maintenance. Review Hardware Network Configuration when connecting a panel to the hi network.
Power Connector Pinout
For pin assignments, see Power Connector Pinout.