This page describes the hiPush20 (Mark 2) Hardware Panel and its specifications.
hiPush20 (Mark 2)
Mark 2
19-inch 1RU Hardware Panel with 20 buttons for operation of the hi system. Each button has a 60 x 32 pixel OLED display to indicate the assigned function. This model has no rotary encoders.
Information
Discontinued: This product has been discontinued and is no longer actively maintained or supported. Devices may continue to operate as expected, but future development of this platform is not planned.
Dimensional Views
Front View
hiPush20 Mark 2 Front View.
Rear View
hiPush20 Mark 2 Rear View.
Top View
hiPush20 Mark 2 Top View.
Specifications
|
Regulatory Model |
HI-PNL005 |
|---|---|
|
Number of Switches |
20 |
|
Number of Encoders |
0 |
|
Encoder Meter Indicator |
None |
|
Button Display |
60 x 32 pixel OLED per button |
|
Control Illumination |
RGB backlighting for buttons |
|
Housing Type |
1 Rack Unit |
|
Network Connection |
RJ45, 100Base-T Ethernet |
|
Storage Temperature Range |
-20 °C to +80 °C |
|
Switch Operating Force |
125 ± 35 gf |
|
Input Voltage |
12 V DC nominal (11 V to 13 V operating range) |
|
Power Consumption |
Max. 20 W |
|
External PSU |
CUI SDI30-12-U-P5 (separate part) |
|
Power Connector Type |
WAGO 713 Series 6-pin |
|
Protection Class |
IP20 |
|
Conformity Marking |
CE |
|
Electromagnetic Compatibility (EMC) |
EN 61000-3-2:2014
|
|
RoHS Reference |
EN 50581:2012 |
|
EC Declaration of Conformity |
Dated 23 August 2019
|
|
Directives Named in Declaration |
EMC Directive 2014/30/EU
|
|
Lifecycle Status |
Discontinued |
Commissioning
For installation and commissioning steps, see Hardware Installation and Commissioning. For the default IP address, web interface port, and network setup, see Hardware Network Configuration. For routine care, see Hardware Cleaning and Maintenance.
Ordering Information
This model is discontinued and is no longer available for new orders. Use the regulatory model in Specifications to identify installed hardware.
Power Connector Pinout
For pin assignments, see Power Connector Pinout.