Internal Router Custom 1:1

Driver Maturity

Production

Recommended for normal production use.

Caution

Compatibility Note: This information is a general guide and may be incomplete, may not match a specific project implementation, and is subject to change as supported products and versions evolve. Confirm the exact implementation and requirements for each project with Riedel and the relevant equipment vendor, then validate the required functions end to end in the target environment before deployment.

Minimum hi Version: v2.6.3

Overview

The Internal Router Custom 1:1 is a software 1:1 router for simple Source-to-Destination pass-through routing within hi. A Source can be routed to only one Destination at a time. Routing a Source to another Destination disconnects the Destination that it previously fed.

Connection Details

Property	Value
Protocol	Internal Router Custom 1:1 model
Transport	None
Default Port	Not applicable
Authentication	Not applicable
Device Connection	Not applicable this router exists inside hi
Required License	hiBase

Required Configuration

Parameter	Description	Default
Signal Type	Signal type of the router Audio or Video	Video
Input Count	Number of router inputs	16
Output Count	Number of router outputs	16
Dummy Crosspoints	Create dummy Crosspoints	Yes
1:1 Switching Behavior	A Source can be routed to only one Destination read-only	Yes

Device-Side Setup

No device-side setup is required. The Internal Router is a model inside hi and has no device connection.

Supported Features

Feature	Access	Exposed Operation and Scope
1:1 Pass-through Topology	Model-only	Represents one Destination per Source in the hi system.
Internal Routing	Read/write	Route Sources to Destinations inside the hi system.
Crosspoint Control	Read/write	Set and read Crosspoints on the 1:1 matrix.

Known Limitations

A Source cannot be routed to more than one Destination. Routing a Source to a new Destination disconnects the Destination that it previously fed.

What's Not Supported

Controlling external hardware routers; this router exists only inside hi.